The fpvmanuals Prop Stop is a precision, laser cut piece made from black Delrin. The item is flexible enough to not prevent the props from folding, yet is strong enough to provide resistance against the props folding too far in (or out).
“The fpvmanuals prop-stop works better than the Aeronaut one. Team Black Sheep is now using them in our TBS Zephyr kits.”
Trappy, Team Black Sheep, January 2012
Trappy, Team Black Sheep, January 2012
We offer two versions, both of them are in stock and ready to ship from our store:
- 6mm hole for the prop adapter
- 8mm hole for the prop adapter
Prop-Stops now ship for a flat fee of $2.99 USD world-wide!
$7.99 (for 2 prop-stops) Order Now
Your prop middle piece (yoke) should not be longer than 40mm. I suggest the Graupner folding spinner that is either 34mm or 38mm, but many other folding props work as well. The kit contains 2 prop adapters, which you can use for the front and back, or stick them together if you require a stiffer resistance. You will need to size these pieces to fit your middle piece by cutting them to size with good sizers.
- Number of prop stops in kit: 2
- Length: 45mm
- Diameter of hole for Prop Adapter: 6mm or 8mm
- Thickness: 0.8mm
